Filter Installation
Installing the microfilters doesn't take much, first you need to take off the glove compartment, it only has 6 Phillips screws holding it on. Be careful with the yellow Air Bag cable, you don't want to set off the air bag on accident while your next to it. You'll have to use a razor to cut a hole in the airbox, just follow the lines etched on the box. After the plastic is out just slip the filters in and put the metal clip on to hold it together. replace all the equipment when you're done.
in this picture you can also see the control box for the CB radio screwed into the back of the glove compartment.